44
Finalizing the Installation
(for qualified installers only)
© Travis Industries
4100519
100-01197_001
Ember Placement
Place the embers along the firebox floor and burner to help conceal the burner. Make sure none of
the embers are directly over the burner holes. See the photo below (the logs were removed to
better show ember placement).
NOTE
: The embers may be placed over the air slots near the burner, but do not place too much as
to impede proper airflow.
Rock Wool Placement
The included rock wool is placed on top of the burner to enhance the glow from the burner.
The rock wool works best when it is applied in a very thin, porous layer.
The best method
for applying the rock wool is to brush it on to the burner. Compress a clump of rockwool
between your thumb and forefinger. Use a stiff brush to apply a thin layer of rockwool fibers
onto the burner. Do not use the entire bag of rockwool. Use only a small amount and save the
remainder. Over-use of rockwool will diminish the glow and may cause sooting or other adverse
conditions.
Note how the embers do not
cover any burner holes. Place
the embers around the burner
to create a realistic effect.
