THE OPERATION OF
RECALLING RECORDS
Recalling the records
1
.Press the “MEM” to show
the last 3 average of the
record.
2
. Press the “MEM”
or “SET” to get the
record you want.
The most recent record (1) is shown first. Each new measurement
is assigned to the first (1) record. All other records are pushed back
one digit (e.g., 2 becomes 3, and so on), and the last record (60) is
dropped from the list.
CAUTION
UP
DOWN
MEM
SET
MEM
SET
If you did not get the correct measurement, you can delete all
results by following below steps.
Deleting a measurement record from memory
1.Hold pressing “MEM” for 3
seconds, when the memory is
shown.
2.When flash “Delete all”, press the
“SET” to delete the memory.
3.If you don’t want to delete the
records, press
“S T A R T / S T O P ” to escape.
4.If there is no record. the
right display will show.
MEM
SET
THE OPERATION OF
RECALLING RECORDS
MEM
SET
