Positioning the wrist cuff
1
.Remove all accessories (watch, bracelet, etc) from your left wrist. If your
physician has diagnosed you with poor circulation in your left wrist, use your
right wrist.
2
.Roll or push up your sleeve to expose the skin.
3
.Apply the cuff to your left wrist with your palm facing up.
4
.
Position the edge of the cuff about 1-1.5cm.
5
.
Fasten the wrist cuff around your wrist, leaving no extra room between the cuff
and your skin. If the cuff is too loose, the measurement will not be accurate.
6
.When the blood pressure monitor show
“[ ]”, it means matching successfully;
W h e n i t d i s p l a y ” E 1 ” , i t i n d i c a t e s
matching unsuccessfully.
7
.If matching successfully, it will show the
lately measuring record on the “receive
data” column.
8
.Choose “Bloodpressure Record” to view
the history record.
9
.Click “back” to return main interface of
testing software and go on testing next
blood pressure monitor.
Resting for 5 minutes before measuring.
Wait at least 3 minutes between measurements. This allows your blood
circulation to recover.
For a meaningful comparison, try to measure under similar conditions. For
example, take daily measurements at approximately the same time, on the same
wrist, or as directed by a physician.
BEFORE YOU START
MEASUREMENT
