BEFORE YOU START
BEFORE YOU START
Slide off the battery cover.
Install the batteries by matching the correct polarity, as shown
below
. Always use the correct battery type (2 alkaline LR03AAA-size).
Replace the cover.
The installment and replacement of battery
Setting Date, time and measurement unit
It is important to set the clock before using your blood pressure
monitor, so that a time stamp can be assigned to each record that
is stored in the memory. In sure the “lock” key is glided to the
unlock mode.(year :2010—2050; time:24 H))
Remove batteries if the device is not likely to be used for some time.
The old battery is harmful to the environment, so please disposal with other daily trash.
Remove the old battery from the device and follow your local recycling guidelines.
CAUTION
Replace the batteries whenever the below happen
The shows
The display dims
The display does not light up
2
.Press the “MEM” to
change the [Hour].
1
.Pressing “SET” for
3 seconds to enter
the mode for [Hour]
setting.
3
.When you get the right [Hour],
press “SET” to set down and
turn to next step automatically.
MEM
SET
MEM
SET
MEM
SET
