Transmitter Solutions EIS-40 Скачать руководство пользователя страница 25

Страница: 25 / 44

EIS-LCD, EIS-40

USER MANUAL

Page 24

Output 2 - Settings for output 2:

•

Output (relay) mode:

User can select between 3 options

Disable

-Output is disabled

Latching

-Output is in latching mode. First Caller ID or PIN entry will activate the output,

second Caller ID or PIN entry will deactive the output.

Time Pulse

-Output is time pulse mode. After output is triggered it will be activated for the

time defined in

Output pulse duration

, after that time output will be restored.

•

Output pulse duration:

ON time for output in case of output mode

Timer pulse.

•

Output is:

Output can work in normal or inverted (normally close) mode.

Normally open-

In idle mode output pins are in open position.

Normally closed-

In idle mode output connection are closed.

Additional output settings - Setting are used to link onboard actions with the outputs if needed:

•

Voice active indication:

When unit reaches voice connection (intercom call) output

defined under this section gets activated.

•

Unauthorized call or SMS received:

If unauthorized call or SMS is received on the unit

this event will activate output defined under this section.

•

Button pressed indication:

When intercom call button is pressed output defined under this

section gets activated.

•

Input 1 activate output:

If input 1 is in alarm mode (

Input operation mode:

Normal

mode

selected) alarm input event on the input will activate output defined under this section.

•

Input 2 activate output:

If input 2 is in alarm mode (

Input operation mode:

Normal

mode

selected) alarm input event on the input will activate output defined under this section.

NOTE

Do to limitation of the outputs use additional outputs settings with care.

Содержание EIS-40













































Результаты поиска

Содержание EIS-40

Отзывы:

Похожие инструкции для EIS-40

Бренды по названию

Популярные бренды

Transmitter Solutions EIS-40, Руководство пользователя

Результаты поиска

Содержание EIS-40

Отзывы:

Похожие инструкции для EIS-40

Бренды по названию

Популярные бренды