EIS-LCD, EIS-40
USER MANUAL
Page 20
Second Wiegand interface is shared with alarm input lines, user must select
Wiegand
in
Input
operation mode
found in the
Inputs
tab.
Additional settings for Wiegand interface input are found in
Wiegand input 2 configuration
sections.
Figure 10: WEB Server-Wiegand interface support.
•
Mode:
Select appropriate data formatting (Advise unit provider for more info if needed,
mode 2 is most common setting)
•
Facility code:
User can
Enable
or
Disable
facility code field.
Wiegand devices can be defined in two sections. First section is permanent use and second is
temporary use which is limited by the consecutive time they are used.
NOTE
See Chapter
Error! Reference source not found.
-
Error! Reference source
not found.
for detailed explanation of different data format options.
IMPORTANT
Unit MUST be restarted when switching between
Normal
and
Wiegand
mode
in the
Input operation mode.
Permanent use: devices are added in
Pin access
tables.
