Transition Networks
CBFTF10xx-1xx User Guide
33403 Rev. E
https://www.transition.com
Page 12 of 15
Technical Specifications
For use with Transition Networks Model CBFTF10xx-10x or equivalent.
Standards
IEEE Std. 802.3u, 802.3x
Data Rate
10 Mbps; 100 Mbps
Weight
1 lbs. [0.45 kg]
Power Consumption 3 watts
Max. Packet Size:
2048 bytes untagged bytes
2044 bytes tagged bytes
Filtering & Forwarding 14,880 pps for Ethernet; Rate 148,800 pps for Fast Ethernet
Dimensions
Width: 0.86” [22 mm] x Depth: 5.0” [127 mm] x Height: 3.4” [86 mm]
Power Consumption 4.0 Watts
Environment
See chassis specifications
Regulatory Compliance FCC Class A, CISPR22/EN55022
Class A, EN55024, EN61000, CE Mark
MTBF
Greater than 250,000 hours (MIL-HDBK-217F)
Greater than 687,500 hours (Bellcore7 V5.0)
Warranty
Lifetime
For current information on the
CBFTF10xx-10x
see the online user guide at
https://www.transition.com
.
Product is certified by the manufacturer to comply with DHHS Rule 21/CFR, Subchapter J applicable at
the date of manufacture.
WARNING: Visible and invisible laser radiation when open. Do not stare into the beam or view the beam
directly with optical instruments. Failure to observe this warning could result in an eye injury or
blindness.
WARNING: Use of controls, adjustments or the performance of procedures other than those specified
herein may result in hazardous radiation exposure.
The fiber optic transmitters on this device meet Class I Laser safety requirements per IEC-825/CDRH
standards and comply with 21 CFR1040.10 and 21CFR1040.11.
*MTBF is estimated using the predictability method. This method is based on MIL-217F and Bellcore
standards at 40°C ambient temperature, typical enclosure heat rise of 10°C, and nominal operating
conditions and parameters. Installation and configuration specific MTBF estimates are available upon
request. Contact Technical Support.
CAUTION: Copper based media ports, e.g., Twisted Pair (TP) Ethernet, USB, RS232, RS422, RS485, DS1,
DS3, Video Coax, etc., are intended to be connected to intrabuilding (inside plant) link segments that are
not subject to lightening transients or power faults. Copper based media ports, e.g., Twisted Pair (TP)
Ethernet, USB, RS232, RS422, RS485, DS1, DS3, Video Coax, etc., are NOT to be connected to inter-
building (outside plant) link segments that are subject to lightening transients or power faults.
Failure to observe this caution could result in damage to equipment.
