Transition Networks
CBFTF10xx-1xx User Guide
33403 Rev. E
https://www.transition.com
Page 11 of 15
CBFTF1029-107, CBFTF1029-108
single mode
Fiber-optic Transmitter Power:
min: -8.0 dBm
max: -3.0 dBm
Fiber-optic Receiver Sensitivity:
min: -33.0 dBm
max: -3.0 dBm
Link Budget:
25.0 dB
CBFTF1035-105
multimode
Fiber-optic Transmitter Power:
min: 0.0 dBm
max: 5.0 dBm
Fiber-optic Receiver Sensitivity:
min: -36.0 dBm
max: -3.0 dBm
Link Budget:
36dB
CBFTF1039-105
multimode
Fiber-optic Transmitter Power:
min: -19.0 dBm
max: -14.0 dBm
Fiber-optic Receiver Sensitivity:
min: -30.0 dBm
max: -14.0 dBm
Link Budget:
11dB
Copper Cable
maximum cable distance: 100 meters
Category 3:
(Minimum requirement for 10 Mb/s operation)
Gauge
24 to 22 AWG
Attenuation
11.5 dB/100m @ 5-10 MHz
Category 5:
(Minimum requirement for 100 Mb/s operation)
Gauge
24 to 22 AWG
Attenuation
22.0 dB /100m @ 100 MHz
•
Straight-through (MDI) or crossover (MDI-X) twisted-pair cable must be used.
•
Shielded twisted-pair (STP) or unshielded twisted-pair (UTP) may be used.
•
Pins 1&2 and 3&6 are the two active pairs in an Ethernet network .
•
Use only dedicated wire pairs for the active pins
(e.g., blue/white & white/blue, orange/white &
white/orange, etc.)
•
Do not use flat or silver satin wire.
