BIOS SETUP
31
•
Video Off After
Select the power-saving modes during which the monitor goes blank.
Doze : Monitor remains “on” during Doze modes.
Suspend : Monitor blanked when system enters Suspend mode.
N/A : It is default. When system enters power-saving mode, it does not do the video off
action.
•
MODEM Use IRQ
You can select one of the following interrupt resources for modem use: 3.4.5.7.9.10.11.There
are three Green PC power saving functions. They are user-configurable only during User
Defined Power Management mode.
•
Doze Mode
After the selected period of system inactivity (1 minute to 1 hour), the CPU clock runs at
slower speed while all other devices still operate at full speed.
•
Standby Mode
After the selected period of system inactivity (1 minute to 1 hour), the fixed disk drive and
the video shut off while all other devices still operate at full speed.
•
Suspend Mode
After the selected period of system inactivity (1 minute to 1 hour), all devices except the
CPU shut off.
•
HDD Power Down
After the selected period of system inactivity (1 to 15 minutes), the hard disk drive powers
down while all other devices remain active.
•
Throttle Duty Cycle
When the system enters Doze mode, the CPU clock runs only part of the time. You may
select the percent of time that the clock runs.
•
PCI/VGA Active Monitor
When enabled, any video activity restarts the global timer for Standby Mode.
•
Soft-Off by PWR-BTTN
When set to “Instant-off”, the ATX switch can be used as a normal system power off
button. When set to “Delay 4 seconds”, you need to hold the ATX switch for more than 4
seconds if you want to power off the system.
