10
HARDWARE INSTALLATION
2.6 Memory Configuration
This motherboard must be installed with DIMMs (Dual Inline Memory Modules). The DIMMs
must be 3.3 Volt synchronous DRAM modules. It also supports ECC (Error Checking and
Correcting), which is valid for TS-ABX11 only.
IMPORTANT: Memory speed setup is required through “Auto Configuration“ in BIOS
Chipset Features Setup.
Install memory in any combination as follows:
168-pin DIMM
SDRAM 8,16, 32, 64,128, 256MBytes
SDRAM 8,16, 32, 64,128, 256MBytes
SDRAM 8,16, 32, 64,128, 256MBytes
768MBytes (max.)
DIMM Location
DIMM1
DIMM2
*DIMM3
**Total Memory
*DIMM3 is for TS-ABX11only.
**768 MB is maximum for the TS-ABX11, while 256MB is maximum for the TS-AZX11.
TS-ABX11/TS-AZX11 168Pin DIMM Sockets
Transcend
Unbuffered Position
3.3V Position
1 6 8 P i n S D R A M M o d u l e ( D I M M 1 )
1 6 8 P i n S D R A M M o d u l e ( D I M M 2 )
1 6 8 P i n S D R A M M o d u l e ( D I M M 3 )
