36
BIOS SETUP
•
•
•
•
•
Onboard Serial Port 1
Select an address and the corresponding interrupt for each of the first and second serial
ports.
The Choice: 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto.
•
Init Display First
This item allows you to decide to activate PCI Slot or AGP first.
•
•
•
•
•
POWER ON Function
1 - Button only : Power on only by pushing button on the case (Default).
2 - Keyboard 98 : You can power on system by pushing Power-On key of keyboard 98.
3 - Password : Power on only if you key in correct password.
4 - Hot KEY : You can choose either of followings as hot key to power on the system.
A. [ CTRL ] + [ F1 ] ~ [ CTRL ] + [ F10 ]
B. Mouse [ Left ]
C. Mouse [ Right ]
•
•
•
•
•
KBC Input Clock
1 - 6MHz
2 - 8MHz
3 - 12MHz
à
Default
4 - 16MHz
Set the frequency for the keyboard controller input clock.
•
•
•
•
•
Onboard FDC Controller
You can use this function to enable or disable onboard FDC controller.
•
•
•
•
•
On-Chip IDE Primary / Secondary PCI IDE
The chipset contains a PCI IDE interface which supports two IDE channels. Select “Enabled”
to activate the first and/or second IDE interface. Select “Disabled” to deactivate an interface,
if you install a primary and/or secondary add-in IDE interface.
•
•
•
•
•
USB Keyboard Support
Select “Enabled” if you have a USB keyboard.
