30
BIOS SETUP
2. Min. Power Saving : Minimum power management mode. Inactivity peroid is
defined as below.
Doze Mode = 1 hr.
Standby Mode = 1 hr.
Suspend Mode = 1 hr.
HDD Power Down = 15 min.
3. Max. Power Saving : Maximum power management mode. Inactivity period is defined
as below.
Doze Mode = 1 min.
Standby Mode = 1 min.
Suspend Mode = 1 min.
HDD Power Down = 1 min.
4. User Defined : Allows you to set each mode individually. Select time-out period for
each mode shown above.
•
PM Control by APM
When enabled, an Advanced Power Management device will be activated to enhance the
Max. Power Saving mode and stop the CPU internal clock.
If the Max. Power Saving is not enabled, this will be preset to “No”.
•
Video Off Method
Determine the manner in which the monitor is blanked.
-V/H SYNC+BLANK :
System turns off vertical and horizontal synchronization and ports
and writes blanks to the video buffer.
-DPMS :
Select this option if your monitor supports the Display Power
Management Signaling (DPMS) standard of the Video Electronics
Standards Association (VESA). Use the software supplied for
your video subsystem to select video power management values.
- Blank Screen :
System only writes blanks to the video buffer.
