manualshive.com logo in svg

Trane CVGF1000, Инструкция по установке, эксплуатации и обслуживанию


Поделиться
Скачать
background image

Copyright

© 2008 Trane All rights reserved

This document and the information in it are the property of Trane and may not be used 
or reproduced in whole or in part, without the written permission of Trane. Trane reserves 
the right to revise this publication at any time and to make changes to its content without 
obligation to notify any person of such revision or change.

Trademarks

Trane, the Trane logo, are trademarks of Trane in the United States and other countries. 
All other brands and products referenced in this document are acknowledged to be the 
trademarks or registered trademarks of their respective holders.

Warnings and Cautions

Warnings and cautions are provided in appropriate places throughout this document:

Environmental Concerns!

Scientific research has shown that certain man-made chemicals can affect the earth’s 
naturally occurring stratospheric ozone layer when released to the atmosphere. In 
particular, several of the identified chemicals that may affect the ozone layer are 
refrigerants that contain Chlorine, Fluorine and Carbon (CFCs) and those containing 
Hydrogen, Chlorine, Fluorine and Carbon (HCFCs). Not all refrigerants containing these 
compounds have the same potential impact to the environment. Trane advocates the 
responsible handling of all refrigerants—including industry replacements for CFCs 
such as and HCFCs and HFCs.

Responsible Refrigerant Practices!

Trane believes that responsible refrigerant practices are important to the environment, 
our customers, and the air conditioning industry. All technicians who handle 
refrigerants must be certified. The Federal Clean Air Act (Section 608) sets forth the 
requirements for handling, reclaiming, recovering and recycling of certain refrigerants 
and the equipment that is used in these service procedures. In addition, some states 
or municipalities may have additional requirements that must also be adhered to for 
responsible management of refrigerants. Know the applicable laws and follow them.

NOTICE: 

Warnings and Cautions appear at appropriate sections through-

out this literature. Read these carefully.

�

 

WARNING:

 Indicates a potentially hazardous situation which, if not 

avoided, could result in death or serious injury.

� 

CAUTION:

 Indicates a potentially hazardous situation which, if not 

avoided, may result in minor or moderate injury. It may also be used to 
alert against unsafe practices.

CAUTION:

 Indicates a situation that may result in equipment or property-

damage only accidents.

© 2016  Trane All rights reserved

Содержание CVGF1000

































































































































Отзывы:

Нет отзывов

Похожие инструкции для CVGF1000

AERMEC FCS 22 User Manual preview
FCS 22
Бренд: AERMEC Страницы: 15
Jensen 560804147 Operating Instructions Manual preview
560804147
Бренд: Jensen Страницы: 70
Troy-Bilt OEM-290-262 Installation And Operation Instructions preview
OEM-290-262
Бренд: Troy-Bilt Страницы: 4
LG ACHH Series Manual preview
ACHH Series
Бренд: LG Страницы: 107
Traulsen TBC13 Service Manual preview
TBC13
Бренд: Traulsen Страницы: 26
oxford diffraction KMW150CCD User Manual preview
KMW150CCD
Бренд: oxford diffraction Страницы: 27
Parker Hiross Hyperchill Plus ICEP007 User Manual preview
Hyperchill Plus ICEP007
Бренд: Parker Hiross Страницы: 218
MTD H121GC Replacement Parts preview
H121GC
Бренд: MTD Страницы: 2
MTD 510r Parts List preview
510r
Бренд: MTD Страницы: 3
Scheppach MTP560 Instruction Manual preview
MTP560
Бренд: Scheppach Страницы: 156
Zanotti BX Use And Maintenance Instructions preview
BX
Бренд: Zanotti Страницы: 32
Nakayama Premium Series Owner'S Manual preview
Premium Series
Бренд: Nakayama Страницы: 40
Racing RAC36CS-UK Instruction Manual preview
RAC36CS-UK
Бренд: Racing Страницы: 25
Wallenstein BXR Series Operator'S Manual preview
BXR Series
Бренд: Wallenstein Страницы: 72
Quantech QTC2015T Manual preview
QTC2015T
Бренд: Quantech Страницы: 72
Jensen A141 XL ZX Manual preview
A141 XL ZX
Бренд: Jensen Страницы: 132
KegLand IceMaster G40.1 Instruction Manual preview
IceMaster G40.1
Бренд: KegLand Страницы: 10
Craftsman 536.292500 Operating Instructions Manual preview
536.292500
Бренд: Craftsman Страницы: 36

Бренды по названию

Популярные бренды

Загрузить еще бренды