71
TRAK Machine Tools
Southwestern Industries, Inc.
TRAK TRL Lathe, ProtoTRAK RLX CNC Safety, Installation, Maintenance, Service & Parts List
5.1.12
Spindle Removal – 1630HSRX only
(See Figure 5.1.2)
The following procedure is to remove the spindle for the 1630HS lathe.
1.
Remove both spindle pulley belts.
2.
Loosen three set screws on locknut item #21. Remove locknut.
3.
Remove belt pulley item #20. Mark orientation of pulley to spindle shaft
4.
Remove two keys item #19.
5.
Loosen three set screws on locknut item 18. Remove locknut.
6.
Remove six M6 socket head cap screws item #4
7.
Cover end of spindle with aluminum or brass drift to prevent damage. Strike to remove spindle.
Carefully remove seal ring item #17 and encoder drive gear item #12 as spindle is driven
forward. Remove O-ring item #6.
8.
Remove two bearings item #14
Note:
the initial design of the spindle was different from what is reflected in Figure 5.1.12a and in
the parts list below. The spindle bearings are a 7013 bearing, p/n 24747.
Figure 5.1.12a - 1630HSRX – Spindle Assy P/N 24785 & Parts List Shown
