11
TRAK Machine Tools
Southwestern Industries, Inc.
TRAK TRL Lathe, ProtoTRAK RLX CNC Safety, Installation, Maintenance, Service & Parts List
Headstock Lubrication
Oil Bath
Grease
Oil Bath
Oil Bath
Options
Tooling Kit
¾”
¾”
¾” or 1”
1”
Chuck
8”, D1-6
6”, A2-4
8”, D1-6
12”, D1-8
5C Collet Closer
D1-6
A2-4
D1-6
n/a
Turret Option
¾”, 8-
Position
¾”, 4-
position
¾”, 8-
Position
¾”, 4-
position
¾ or 1” 8-position
¾ or 1” 4-position
1”, 4-
position
1”, 8-
position
Gang Tooling
n/a
n/a
¾”
n/a
* no maintenance grease cartridge
2.3 Uncrating
Carefully remove the wood crate and protective packaging, paying attention not to scratch, damage, or mar
any parts of the machine.
Remove the cardboard boxes with the PENDANT DISPLAY (handle carefully). The leveling pads and screws
for the machine can be found in the toolbox.
Loosen and remove the screws and nuts holding the machine to the wood pallet.
ATTENTION!
Immediately report, in writing, any damages observed at this time that can be
attributed to the transportation or improper handling/moving of the machine.
Figure 2.3 shows the bracket used to ship the 2470 doors during shipment. This bracket remains on the
machine, but the bolt circled is to be removed.
Figure 2.3 – 2470 Door Shipping Bracket
