TRAK Trak Male Fertility Testing System, Руководство пользователя

Страница: 16 / 44

Running the Test
09
Pick up the Volume Cup. Pick up the dropper.
Squeeze the
top
bulb of the dropper, and
then insert the open tip of the dropper into the
deepest part of the sample (to avoid loading
bubbles). Release the top bulb to fill. Make sure
the “stick” part of the dropper is completely full.
If a whole sample is collected, but
there isn’t enough to fill the dropper,
discard the cup and dropper and try
again in 2 to 7 days.
If your sample is too thick to load, leave
the sample in the cup for at least 15
additional minutes, or up to 2 hours
after sample collection. Be sure to swirl
the cup for at least 15 seconds before
filling the dropper.
The bottom bulb is for overflow and
should partially fill.
15