7
ST1-075A Ia 12/98
Figure 3
OM0260
Hydraulic Installation
The sandbagger utilizes the SEE TRactor
excavator boom or bucket tilt circuit for hydraulic
power and control.
Hudraulic pressure to the excavator boom function
originates at the boom function control valve
located at the excavator attachment control
station. The quick disconnect kit is installed as
shown in Figure 3. Two hoses (connection hoses)
are utilized from the quick disconnects located on
each side of the excavator boom, routed to quick
disconnects (2) located on the upper right back
side of the sandbagger attachment (Figure 3).
The sandbagger is supplied with quick disconnects
on the attachment and on both ends of the
connection hoses.
The quick disconnects are arranged so that auger
rotation, clockwise when looking at the end of the
auger, (Figure 4) is correct when control lever is
pushed away from operator.
A quick disconnect kit for easy installation and
removal of the sandbagger attachment is supplied
for installation on the host vehicle. This kit
contrains 2 sets of quick disconnects with adapter
fittings (Figure 5). See parts manual for kit part
number.
Figure 4
Figure 3
OM0270
OM0260
auger rotation
adapter
straight
male quick
disconnect
female quick
disconnect
connection hose
25 foot
excavator
boom end
connection hoses
25 foot
quick
disconnect kit
sandbagger
excavator
boom
quick dis-
connects
female quick
disconnect
male quick
disconnect
connection hose
25 foot
adapter
straight
adapter
straight
