3
ST1-075A Ia 12/98
The information in this manual does not replace
any safety rules and laws used in your area.
Before operating this product, learn the rules and
laws for your area. Make sure the product
complies with these rules and laws.
Your safety and the safety of others in the work
area depends significantly upon your knowledge
and understanding of all correct operating
practices and procedures for this product.
The signal word “Warning” means a hazard exists
on or near the product which can result in serious
injury or death if the proper precautions are not
taken.
The signal word “Caution” is a reminder of safety
practices or directs attention to unsafe practices on
or near the product which could result in personal
injury if the proper precautions are not taken.
This symbol means “Attention! Become Alert!
Your Safety Is Involved!” The symbol is used
with the following signal words to attract your
attention to safety messages found on the safety
decals and throughout this manual. The message
that follows the symbol contains important
information about Safety.
To avoid possible injury
or death, carefully read and follow the messages!
Be sure to fully understand the potential causes of
injury or death.
Signal Word:
Is a distinctive word on the safety decals and
throughout this manual that alerts the viewer to the
existence and relative degree of the hazard.
At the time of original purchase, the purchaser of
this attachment was instructed by the seller on its
safe and correct use. If this attachment is to be
used by an employee or is loaned or rented to
someone other than the purchaser, make certain
that the new operator reads and understands this
Operator’s Manual and the host vehicle’s
Operator’s Manual that are provided with the
equipment before operating the attachment.
In addition, make sure that the new operator has
completed a walk-around inspection of the
attachment and host vehicle, is familiar with all
decals and safety equipment for the attachment
and host vehicle, and has demonstrated the
correct use of all controls.
The signal word “Danger” means an extremely
hazardous situation exists on or near the product
which would result in high probability of death or
serious injury if proper precautions are not taken.
Safety Practices
Signal Words
New or Additional Operators
Danger
Caution
Warning
!
!
!
!
