TRADEDX SSR-4N108L, Руководство пользователя

Страница: 47 / 85

Power Distribution Board Cover (PDB Cover)
Removing a Power Distribution Board Cover
Follow these steps to remove a PDB cover:
1. Power off the JBOD and detach all of the power cords from the power supply.
2. Open an HDD drawer. See
“Opening an HDD Drawer” on page 13.
3. Remove a rear top cover. See
“Removing a Rear Top Cover” on page 24.
4. Remove a screw securing a PDB cover to the chassis.
5. Remove a PDB cover.
Installing a Power Distribution Board Cover
Follow these steps to install a PDB cover:
1. Align the hole on a PDB cover with the hole on the chassis. Make sure the
standoffs on the chassis are locked with the PDB cover.
2. Secure a PDB cover to the chassis with a screw.
3. Install a rear top cover. See
“Installing a Rear Top Cover” on page 25.
4. Close an HDD drawer. See
“Closing an HDD Drawer” on page 14.