TRADEDX SSR-4N108L, Руководство пользователя

Страница: 18 / 85

4. Execute the ipmitool command to reset all installed expanders after topology mode
changed.
Command:
#ipmitool –H <ip address> -U <username> -P <password> -I lanplus raw 0x30 0x02
<Expander ID> 0x00
Hint:
<Expander ID>: ID of specified expander, must be 1 ~ 4.
Example :
a.
Set JBOD topology mode as “0x01: Standard”.
#ipmitool –H 192.168.0.100 -U admin -P admin -I lanplus raw 0x30 0x04 0x01 0xa0
0x01
01
#ipmitool –H 192.168.0.100 -U admin -P admin -I lanplus raw 0x30 0x04 0x02 0xa0
0x01
02
#ipmitool –H 192.168.0.100 -U admin -P admin -I lanplus raw 0x30 0x04 0x03 0xa0
0x01
03
#ipmitool –H 192.168.0.100 -U admin -P admin -I lanplus raw 0x30 0x04 0x04 0xa0
0x01
04
#ipmitool –H 192.168.0.100 -U admin -P admin -I lanplus raw 0x30 0x02 0x01 0x00
01
#ipmitool –H 192.168.0.100 -U admin -P admin -I lanplus raw 0x30 0x02 0x02 0x00
02
#ipmitool –H 192.168.0.100 -U admin -P admin -I lanplus raw 0x30 0x02 0x03 0x00
03
#ipmitool –H 192.168.0.100 -U admin -P admin -I lanplus raw 0x30 0x02 0x04 0x00
04