TRADEDX SSR-4N108L, Руководство пользователя

Страница: 28 / 85

Removing a HDD Drawer in limited space
1. Follow these steps to remove an HDD drawer in limited space:
1. Power off the JBOD and detach all of the power cords from the power supply.
2. Open an HDD drawer. See
“Opening an HDD Drawer” on page 13.
3. Remove a cable cover. See
“Removing a Cable Cover” on page 35.
4. Remove the HDDs. See
“Removing a 3.5” HDD” on page 30.
5. Remove the expander boards. See
“Removing an Expander Board” on page 31.
6. Disconnect the cables from the HDD backplanes.
7. Remove the screws securing a rear cable chain bracket to the HDD drawer.
8. Slide a rear cable chain bracket to unlock and remove.
9. Slide an HDD drawer until it is fully extended.
10. Push the mechanism at the front of inner rail to ON.