TU600-X
Trackunit TU600-X, Technical Manual v1.0, December 2019
Page 29
Including:
Standard
Version
Description
ISO 13766-1, ISO 13766-2
2018
Earth-moving machinery and Construction
machinery
EN 13309
2010
Construction machinery
(Expire 2021-06-30)
EN/ISO 14982
2010
Agricultural and forestry machines
EN 12895, DIN EN 12895
2015
Industrial trucks - Electromagnetic
compatibility
(EN/IEC 62368-1 + AC/3, A11)
2014, 2015,
2017
Information and communication technology
equipment safety
EN/IEC 62133 {Ed2}
2012
Safety requirements for portable sealed
secondary cells, and for batteries made
from them.
Environmental compliance
The TU600-x are designed for compliance to the following environmental standards related to the
intended use of the product:
Standard
Version
Description
A, B
SAEJ1455:2012, EN/IEC 60068-2-1
2007
Cold
SAEJ1455:2012, EN/IEC 60068-2-2
2006
Dry Heat
SAEJ1455:2012, EN/IEC 60068-2-27
2010
Shock
SAEJ1455:2012, EN/IEC 60068-2-31
2008
Drop, free fall
SAEJ1455:2012, EN/IEC 60068-2-64
2008
Random vibration
SAEJ1455:2012, EN/IEC 60068-2-78
2001
Damp heat steady state
SAEJ1455:2012,
IEC 60529 + A1 + A2 (CSV) {Ed2.4}
2013
IP67 - Degrees of protection without
HW shield
IP69K & IP66K mounted inside HW
shield.
NOTE A:
The TU600 is not to be mounted in areas with presence of Motor oil, Gasoline, Diesel fuel,
Hydraulic fluid, Brake fluid, Transmission fluid , Glycol and water mixture etc.
NOTE B:
The housing not designed to withstand high pressure cleaning. Only use the TU600 when
mounted inside the designated Trackunit protection cap (Can be ordered at Trackunit A/S) in
mounting areas where high pressure cleaning is common procedure.
