TU600-X
Trackunit TU600-X, Technical Manual v1.0, December 2019
Page 21
For mounting the Trackunit TU600-x in harsh environment, not covered by the compliance
statements or areas where pressure cleaning is required the Trackunit HW shield PN
7402.9551 is required for protective mounting. Please order at Trackunit A/S.
Recommended fuse holders and fuses up to 48V supply voltages (Can be ordered at
Trackunit A/S):
a. Supply voltage 12V/24V (Max 30A)
i. ATO blade fuses (Max 32V/1A) used with Littelfuse FHAC0002SXJ fuse
holder (Standard).
ii. ATP blade fuse (Max 32V/1A - ATO style) used with TaiTek FH-006WR-
12R-12-U fuse holder (Standard).
b. Supply voltage 12V - 48V (Max 30A)
i. FKS blade fuse (Max 80V/3A - ATO style) used with Littelfuse FH2 fuse
holder. (Recommended)
Trackunit A/S
Gasvaerksvej 24, 4 sal
Dk-9000 Aalborg
Tel: +45 9973 0020
E-mail:
Fax: +45 9673 7407
Web:
www.trackunit.com
When contacting technical support, please be prepared to provide the information listed below:
Minimum Information Required for Technical Assistance
If you or a user reports difficulty with a TU600-X unit (i.e. no GPS fixes, not communicating, LED
not working, etc.), it is helpful to retrieve directly from the unit all current configuration settings and
the message log data etc., that is accessible by the technical support when they receive the
following information about the unit.
1. Unit Serial number
Return Merchandise Authorization - RMA
1. If you experience defects in your product, please contact our customer support at:
