TrackSense
®
LyoPro
Version 3.3
Page 6 of 53
User Manual
User Manual TrackSense LyoPro – MAN 7
1.4.
Directives
1.4.1.
EMC
Ellab equipment has been tested to meet the European Electromagnetic
Compatibility Directive
(EMC Directive, 2014/30/EU)
.
The Declaration of
Conformity for your instrument lists the specific standards at which the unit
was tested.
1.4.2.
Low Voltage (Safety)
In order to comply with the European Low Voltage Directive
(LVD)
2014/35/EU)
, Ellab equipment has been designed to meet the
EN 61010-1
standard.
1.4.3.
Waste Electrical and Electronic Equipment
All products supplied after February 1st, 2003 meet the requirements
of the Directive 2012/19/EU on the Waste from Electrical and
Electronic Equipment (WEEE).
This means that all Ellab products, which must be recycled or handled
separately, are marked with the WEEE label in accordance with Directive
2012/19/EU Waste from Electrical and Electronic Equipment.
In addition, Ellab A/S accept scrapped equipment from customers and sort it
for waste disposal. Used equipment returned to Ellab A/S for service may also
be scrapped in accordance with the Directive. However, it is not legal to ship
waste products across country borders for disposal.
Ellab distributors are obliged to register waste in accordance with their
national legislation, which may also require them to accept scrapped
equipment from end users and dispose of it according to their national laws.
This Declaration of Conformity is issued under the sole responsibility of the
manufacturer, pursuant to ISO/IEC 17050. It does not affect the warranty
obligations of the supplier.
We reserve the right to exceed the standards as part of our product
development program.
