Temprecord International Limited
PO Box 58-430, Botany 2163 | 239D Burswood Drive, East Tamaki 2013 | Auckland, New Zealand
Phone +64 9 274 9825 | Fax +64 9 273 4020 | Email [email protected]
www.temprecord.com
1
Temprecord Mon-T
2
Loggers
How to use Mon-T
2
Data Loggers
The following are quick instructions only.
Please note there is a full Help Wizard built into TempWrite software, under the Menu bar.
Help Button shown below:
Requirements before first use:
•
Temprecord Reader Interface or generic USB Cable and the
•
TempWrite software. Software is available for FREE download from:
http://temprecord.com/our-software/tempwrite/
Software Installation
TempWrite software is available by downloading from
:
http://temprecord.com/our-software/tempwrite/
Log on as Administrator to install software. Do not plug in reader
or cable
until after software is
installed. NOTE:
TempWrite works on the following systems:
Windows 7 , 8, 8.1 and 10
Temperature
Temperature USB
Temperature & RH USB
Standard Temprecord reader
Generic Cable
OR
We recommend a reader to speed up processing batches of loggers
