TrackSAT UltraTrack TS61, Инструкция по установке и эксплуатации

Страница: 16 / 36

12
3.1.2 LED Indicator
ACU LED light indicator shows the status of an antenna tracking, GPS, and system error.
LED Indicator State Description
Track
ON
The system is in tracking
mode on the target satellite.
Blink In searching mode
OFF In initializing
GPS
ON GPS data available
Blink GPS data unavailable
OFF GPS error or malfunction
DiSEqC
ON DiSEqC function enabled
Blink 22 KHz enabled
Blink (rapidly) DirecTV enabled
OFF DiSEqC disabled
Error
ON The system error occurred
OFF The system properly works
Table 2 – ACU LED Indicator Status
3.1.3 Keypad Function
The following table provides a quick reference source on Key Mapping of the ACU.
MENU : 1) press button for checking error
code. 2) press button for 2 sec to enter the
set-up mode. 3) used as an Enter key.
←/TRACK : 1) press button for checking
the antenna status data (use ↑, ↓
button to scroll down). 2) press button for 2 sec for checking PCU & ACU version.
3) used as a left arrow key.
↑/M&C : 1) press button for connecting PC. 2) used as an up key.
↓/SEARCH : 1) press for 2 sec will make the antenna do the re-searching. 2) used
as a down key.
ESC : 1) press button to exit the menu.
→/NEXT: 1) press button to change the target satellite manually (antenna can be
programmed with up to 5 desired satellites as a default mode). 2) used as a right
Figure 20 – LED Indicator
Figure 21 – Keypad Layout