TrackSAT UltraTrack TS61, Инструкция по установке и эксплуатации

Страница: 20 / 36

16
Figure 27 – GPS Information Setting
3.3.3 Selecting Area
Before selecting your satellites, you need to select the service area from among
Asia, Europe, Latin America, and North America.
① Press MENU for 2 sec to enter set-up mode
② Press ↓key x 2 and press menu button to enter “program Area” menu.
③ Use “↑,↓” key to change area: Asia, Asia is default
④ Select your area and press MENU button.
3.3.4 Program Satellite for Australian Set Top Boxes (VAST & Foxtel)
(Select the desired satellites note different settings Foxtel IQ & model 250)
The user can select up to 5 desired satellites on KA-78 ACU. The user needs to select the
DiSEqC mode from among the DiSEqC OFF or the DiSEqC 1.2 ON or 22KHz tones or
Direct TV before selecting the satellites. Selecting Off is the correct setting for one VAST
box or, Foxtel box (non IQ & model 250) and for one of each set 22KHz. Satellite 69 is
for VAST & Satellite 70 is for Foxtel. With a Foxtel IQ box you will need to set the 22KHz
tone function after setting Satellite 69 & 70. RF4 should go to the ACU then Foxtel box
input 1 (horizontal channels), RF1 or RF3 should go directly to Foxtel box input 2 (vertical
channels). With a Foxtel model 250 (white box with rounded ends with one input), you
will need to use the Direct TV function (if your box has both Foxtel & FTA stations).
Without all of the above settings, you will need to allocate and set up Sat 69 for Sat A,
Sat 70 for Sat B , Sat 69 for Sat C Sat 70 for Sat D & Sat 69 for Sat E.