Tracker Hunter Tracker G400, Руководство пользователя

Страница: 50 / 136

50
SMS alarms
Bark alarm and Geofence (area alarm)
Tracker Weather
A weather forecast of the target‟s position
Remove target
You can remove target.
More detailed instructions on some of the main functions:
Single Positioning
The dog‟s location is acquired from GPS and sent to the user
1. Go to map view and choose Show > <name of the target> . Choose Menu and Locate (name of the
target) , then wait a moment.
The position is requested by SMS or GPRS via Live, depending on the state of your collar.
2. In some cases you might want to force the SMS positioning, which is most reliable. Go to map view and
choose
Show > <name of the target> . Choose Menu > Target menu > SMS tracking > Locate .
Tracking (SMS based)
In SMS tracking the position data is sent periodically to the hunter
1. Go to Main Menu and choose Targets > Dogs > <name of the dog> > SMS tracking > Start tracking . Set
the amount of tracking responses wanted and interval of the tracking responses.
Geofence
By giving the radius of a circle you can create a permitted area around given location of the device. If device
leaves the circled area an alarm message informing this is sent to the user.
2. Go to map, choose Show and <name of the target> . Choose Menu and <name of the dog> > >SMS
alarms > Set geofence . Then set the center coordinates (Type in the coordinates, or You can choose the
position of the cursor, the position of the target or Your own position), the geofence radius and alarm interval
(=time how often the device checks if it is in the permitted area or not). Press Send.
In case device exits the permitted area the device sends max. 20 alarm messages to the user. After that, if
the target re-enters the area and leaves again, the device will send another 20 messages.
If the GPS of the device is Off it will automatically turn On if the device exits the permitted area and will be
On according to the interval set for the Geofence.
Bark detector
The device includes a bark detector and bark calculator. Bark calculator encloses into each location message the
number of barks. Bark volume has four default values, which are adjusted from the Tracker Hunter.
1. To set the bark detector sensitivity choose Main Menu > Targets > Dogs > < name of the target>
Configuration commands > Set bark sensitivity . If the bark calculator does not work properly, try another
bark sensitivity.
2. The barking interval is shown in the
map view in the top bar, above the dog‟s icon or you can go to map view
with the target chosen, then press Menu > Target info. Or you can see it in the messages, Main Menu >
Messages