Tracker Hunter Tracker G400, Руководство пользователя

Страница: 36 / 136

36
2.1
2.2
1.2
1.4
1.3
1.1
3.2
3.1
Tracker G400
Tracker G400 is a GPS (Global Positioning System) device that positions itself with the help of satellites and sends
the information to a mobile phone that is running Tracker Hunter software.
When you start using Tracker G400, you should first charge the battery.
Charging
1. Place the charger connector in the socket. 3
3
.
.
1
1
The red light 1
1
.
.
2
2
lits to show the device is charging. The charging may take up to seven hours if the battery is
empty at the beginning.
2. When the charging is complete, the green light 1
1
.
.
2
2
lits.
TIPS:
Use only original charger. A wrong charger may damage the device.
Charging is permitted in the temperature range of +10
C - +30C.
Charge the battery fully before using device for the first time. This will help ensure maximum capacity and lifecycle
of the battery.
Led lights
constant red > device is charging
constant green > battery is fully charged
green light on for a few seconds > device starting up
red light on for a few seconds > device is switching off
red and green flashing every three seconds > device is searching for GPS satellites
green light flashes every three seconds > satellites located and device ready to use (1
red light flashes occasionally > battery low
red light flashes with 1 second frequency when charging > problem in charging.
red light flashes frequently > SIM faulty, missing or locked with PIN code
TIPS:
1) When the device is on, the led lights indicate the GPS operations. If the GPS is set to Off, the led lights do not
flash all the time, but just when the device needs the GPS information from satellites, e.g. when position is
requested.