Printed in the Federal Republic of Germany
TR-Electronic GmbH 2005, All Rights Reserved
08/23/2016
TR - ECE - BA - DGB - 0046 - 06
Page 37 of 43
4.1.3 Clamping brackets
The centering collar with the corresponding fit centers the measuring system in
relation to the shaft. It is fixed to the machine by means of two clamping brackets
which are fastened with four screws.
4.1.4 Servo clamps
The centering collar with the corresponding fit centers the measuring system in
relation to the shaft. It is fixed to the machine by means of three servo clamps.
