Printed in the Federal Republic of Germany
TR-Electronic GmbH 2005, All Rights Reserved
08/23/2016
TR - ECE - BA - DGB - 0046 - 06
Page 33 of 43
2.6 Warranty and liability
The General Terms and Conditions ("Allgemeine Geschäftsbedingungen") of TR-
Electronic GmbH always apply. These are available to the operator with the Order
Confirmation or when the contract is concluded at the latest. Warranty and liability
claims in the case of personal injury or damage to property are excluded if they result
from one or more of the following causes:
Non-designated use of the measuring system.
Improper assembly, installation, start-up and programming of the measuring
system.
Incorrectly undertaken work on the measuring system by unqualified personnel.
Operation of the measuring system with technical defects.
Mechanical or electrical modifications to the measuring systems undertaken
autonomously.
Repairs carried out autonomously.
Third party interference and Acts of God.
2.7 Organizational measures
The other applicable documents must always be kept accessible at the place of
use of the measuring system.
In addition to the other applicable documents, generally applicable legal and other
binding accident prevention and environmental protection regulations are to be
observed and must be mediated.
The respective applicable national, local and system-specific provisions and
requirements must be observed and mediated.
The operator is obliged to inform personnel on special operating features and
requirements.
The personnel instructed to work with the measuring system must have read and
understood the Assembly Instruction, especially the chapter “Basic safety
instructions
” prior to commencing work.
The nameplate and any prohibition or instruction symbols applied on the
measuring system must always be maintained in a legible state.
Do not undertake any mechanical or electrical modifications on the measuring
system, apart from those explicitly described in the other applicable documents.
Repairs may only be undertaken by the manufacturer or a facility or person
authorized by the manufacturer.