Connection / Shielding
TR-Electronic GmbH 2019, All Rights Reserved
Printed in the Federal Republic of Germany
Page 32 of 47
TR-ECE-BA-GB-0138 v04
08/20/2021
7.4 Connection / Perform shielding
Figure 5: Connection components
(1)
Connection element, cable inlet
(2)
O-ring, available optionally
(3)
Sealing
(4)
Grommet nut
(5)
Connection cap, example with axial cable inlets
(6)
6 Fastening screws M4x40-T20 A4-50 according to DIN EN ISO 14580
(7)
1
…3 threaded holes M20x1.5
Generally, the conditions and safety-related notices contained in the corresponding
certificates for the used cable inlets respectively sealing plugs must be observed.
Prepare the cable inlet as shown below and ensure that it is not damaged, fat-free
and clean. In particular, the O-ring (2) shall be checked for correct seat and damage.
Figure 6: Cable inlet M20x1.5
