TR-Electronic A 100 Series, Руководство пользователя

Страница: 14 / 47

Basic safety instructions

TR-Electronic GmbH 2019, All Rights Reserved Printed in the Federal Republic of Germany
Page 14 of 47 TR-ECE-BA-GB-0138 v04 08/20/2021
2.7 Warranty and liability
The "General terms and conditions" (“Allgemeine Geschäftsbedingungen”) of the
company TR-Electronic GmbH apply in general. This will be available to the operator
with the contract confirmation or
–conclusion at the latest. Warranty- or liability
claims with regards to personal- and property damage are excluded, if they are the
result of one or more of the following causes:

Non-intended use of the equipment.

Improper assembly, installation, commissioning, programming, maintenance
or dismantling of the equipment.

Improperly executed work on the equipment by unqualified personnel.

Operating of the equipment in the presence of technical defects.

The performance of unauthorized mechanical or electrical modifications of the
equipment.

The performance of unauthorized repairs

Catastrophic incidents caused by external forces or acts of God.
2.8 Organizational measures

The other applicable documents must always be kept within reach in the equip-
ment's operating location.

In addition to the other applicable documents, the generally applicable legal regu-
lations and other mandatory directives for work safety, accident prevention and
environmental conservation are to be observed and conveyed.

The applicable national-, site- and system-specific provisions and requirements
are to be observed and conveyed.

The operator has the obligation to point out any special operational features and
requirements to the personnel.

Before starting work, the personnel responsible for work on or with the equipment
must have read and understood the -User manual, in particular the chapter on
“Basic safety instructions”.

The nameplate and possible affixed prohibition- or instruction labels on the
equipment must be kept in a readable condition.

Do not perform any mechanical or electrical modifications to the equipment, ex-
cept those which are specifically described in the other applicable documenta-
tions.

Repairs may only be performed by the manufacturer, or by a person or body who
carries the manufacturer's authorization.