Printed in the Federal Republic of Germany
TR-Electronic GmbH 2019, All Rights Reserved
08/20/2021
TR-ECE-BA-GB-0138 v04
Page 23 of 47
5 Assembly
Danger of explosion through the use of couplings which are not suitable
for use in potentially explosive areas!
-
Only couplings may be used which are approved for use in potentially
explosive areas and which meet the requirements of the defined charac-
teristics, see the chapter “Technical data”, as from page 20.
-
Adhere to the assembly and operating instructions of the manufacturer.
Observe references of the “Assembly, installation and dismantling”
chapter, see page 16
Dimensions and requirements to the customer shaft must be taken from the cus-
tomer-specific drawing
Tolerance specifications of the coupling manufacturer are to be adhered to
5.1 Safety-related applications
The assembly in safety-related applications is to be made in accordance with the
Safety Manual, see chapter “Usage in safety-related applications” on page 13.
