manualshive.com logo in svg

TPS WP-91, Руководство пользователя, Страница: 35 / 62

Поделиться
Скачать
TPS WP-91 Скачать руководство пользователя страница 35

 

Page 35

7.  To start automatic logging, press 

 in normal display mode. 

If the 

WP-91

 is logging into the Notepad, the display will look like 

this… 

10.00

 

M    7.00

 

 

Log#  1 12:00:00 

 

The log number will increment and the 

WP-91

 will beep each time a reading is 

recorded. 

If the 

WP-91

 is sending records directly to the RS232 port, the 

display will look like this… 

10.00

 

M    7.00

 

 

Sending 12:00:00 

 

The 

WP-91

 will beep each time a record 

is sent to the RS232 port. 

8.  Press 

 to stop automatic logging. 

Notes: 

1.  The clock must be set before the 

WP-91

 will allow automatic logging 

to start. The message “

Clock Not Set

” is displayed if the clock is not 

set. 

2.  The Battery Saver function (section 14) is disabled while the meter is 

in Automatic Datalogging mode, to stop the meter switching off while 
logging data. Even when the memory is full and the meter stops 
logging, the Battery Saver function is still disabled. This allows the 
data to be downloaded and the memory to be reset remotely. 

Содержание WP-91































































Отзывы:

Нет отзывов