TPS WP-90 Скачать руководство пользователя страница 36

Страница: 36 / 48

Page 36

15. Clock Function

15.1 Setting the Clock

Select the Clock Set-up menu (

→

F4:Setup

→

F2:Clock

The display now shows the current date and time. The cursor starts at the
day.

31/12/98 12:00

←

→

↑↑↓↓

:Set

Press the

and

keys until the day is correct.

Press

to move to the month. Press the

and

keys until the

month is correct.

Press

to move to the year. Press the

and

keys until the year

is correct.

Press

to move to the hour. Press the

and

keys until the hour

is correct.

Press

to move the cursor to the minutes. Press the

and

keys

until the minutes are correct.

Check that the date and time are correct.

If any changes are needed, press the

key to move left to the desired

position.

Press

when the cursor is in the “minutes” position to save the settings.

Press

to quit without resetting the clock.

Note

The

WP-90

does not test for a valid day of the month when setting the clock (eg:

attempting to enter 31/02/96 is not corrected).

15.2 Displaying or Hiding the Clock

Date and time are normally displayed along with the Specific Ion/pH/mV and

Temperature readings. Press

in normal display mode to alternatively display

or hide the clock. When Relative mV is selected, the

key alternatively

displays the clock or absolute mV.

Содержание WP-90

















































Результаты поиска

Содержание WP-90

Отзывы:

TPS WP-90, Руководство пользователя, Страница: 36 / 48

Результаты поиска

Содержание WP-90

Отзывы: