2
Forbid to be bumped or heavily pressed (not over the max capacity),when use the pan forbidden to be
dashed;
If the balance not used for a long time, please clean it up, pack it by plastic bag with drier in;
Please pre-heat for 60 minutes before balance was used to raise the precision.
Part IV. Preparation before Use
Put the balance in a level position before use. Use the level adjust feet under the front place to adjust the
level until the bubble move to the center of the circle.
Put the balance on the stable and flat table , not on the shaking or vibrating plate, to make the balance stable .
(Recommend to use aseismic marble)
Avoid to put balance in the place with big temperature change or air flow, such as the place with direct
sunlight or cold air outlet.
Please use the separate power socket to avoid the interruption by other device.
Please do not put anything on the scale when power on the balance.
※
Make balance adjust itself to the change of temperature
When change the balance from lower temperature to higher temperature or reverse, please put the balance in
the new environment for about 2 hours, then pre-heat the balance, make it conform with the new
temperature.
Part V Out looking and Installation Adjustment
Part VI Display panel
Part VII Instruction for Button
