7
※
If you want to measure different solid’s density , please repeat step 4-8.
※
In the solid density measure mode, if you want to reset the liquid density coefficient, please press
［
MODE
］，
to re-enter the coefficient
settings.
Exit the density mode : Long press
［
MODE
］
and choose the normal weigh mode
NORMALg
Appendix I. Pure water temperature and density cross reference.
T/
℃
g/cm3
T/
℃
g/cm3
T/
℃
g/cm3
0
0.99986
14
0.99927
28
0.99626
1
0.99993
15
0.99913
29
0.99597
2
0.99997
16
0.99897
30
0.99567
3
0.99999
17
0.99880
31
0.99537
4
1.00000
18
0.99862
32
0.99505
5
0.99999
19
0.99843
33
0.99473
6
0.99997
20
0.99823
34
0.99439
7
0.99993
21
0.99802
35
0.99405
8
0.99988
22
0.99780
36
0.99369
9
0.99981
23
0.99756
37
0.99333
10
0.99973
24
0.99732
38
0.99297
11
0.99963
25
0.99707
39
0.99259
12
0.99953
26
0.99681
40
0.99221
13
0.99941
27
0.99654
The weigh method for liquid density
Use density measure device, the volume of planed standard sample must be known.
The user need to enter the volume of standard sample manually. The latest data entered will be stored for
further use.
Step 1
：
To measure the liquid density , please weigh the standard sample in the air;
Step 2
：
Then weigh the standard sample in the liquid want to be measured.
button
（
command
）
steps screen display
long press
［
MODE
］
Enter the choice of mode
1. Enter the density mode
DENSITY
d
2. Release
，
solid density
〖
SOLID
〗
d
Short press
［
ZERO/TARE
］
3. Choose liquid density
〖
LIQUID
〗
d
Short press
［
CAL
］
4. Confirm to enter liquid density measure
Enter “Gravity hammer volume” settings.
05.4957
d
※
User can set the gravity hammer volume on his own, the gravity hammer volume of this balance:
press
［
］
to change the position
，
press
［
TARE
］
to scroll down the number, press
［
CAL
］
to enter the situation for liquid density
measurement.
5.It indicating gravity hammer weighed in the air
〖
HI
〗
0.0000
g
