TPS 900-I3 Скачать руководство пользователя страница 31

Страница: 31 / 48

10. Automatic Datalogging

The

900-I3

can automatically log records into the Notepad. First the logging period must be

programmed, then automatic logging can be started and stopped as required.

Select the Notepad menu (

→

F2:Notepad

)

Select

F4:Program

from the menu.

The display should now look similar to that shown below. The current Logging/Printing Period
is displayed.

Enter Logging/Printing Period : 0 secs

Use the Numeric Keypad to set the period at which the

900-I3

will automatically log records

into memory or to the RS232 port.

Press

to save the Logging/Printing Period.

Press

to quit without changing the current setting.

After pressing

, the

900-I3

will ask you to enter the units. The Logging/Printing Period

you have set is also displayed. For example…

Logging/Printing Period : 2

Logging/Printing Period : 2
Select Units, F1:Hours, F2:Mins, F3:Secs

Select Units, F1:Hours, F2:Mins, F3:Secs

Press

to save the Logging/Printing Period as hours.

Press

to save the Logging/Printing Period as minutes.

Press

to save the Logging/Printing Period as seconds.

If the optional RS232 port is fitted, the

900-I3

will ask if the records are to be logged into the

Notepad, or sent directly to the RS232 port. The display will look like this…

Press

to log records into the Notepad (maximum of 1200 readings).

Press

to send records directly to the RS232 port.

The automatic logging function is now programmed, and can be started and stopped as
required.

To start automatic logging, press

in normal display mode.

When the

900-I3

is logging into the Notepad, the display will look like this…

10.0ppM 7.00pH 500.0mV 25.0

Log# 1, 31/12/98 12:00:00

The log number will increment and the

900-I3

will beep each time a reading is recorded.

If the

900-I3

is sending records directly to the RS232 port, the display will look like this…

10.0ppM 7.00pH 500.0mV 25.0

Sending 31/12/98 12:00:00

The

900-I3

will beep each time a record is sent to the RS232 port.

Press

to stop automatic logging.

Содержание 900-I3

















































Результаты поиска

Содержание 900-I3

Отзывы:

TPS 900-I3, Руководство пользователя, Страница: 31 / 48

Результаты поиска

Содержание 900-I3

Отзывы: