21
Chapter 4
&RQƮJXUHWKH5RXWHULQ6WDQGDUG:LUHOHVV5RXWHU
field. Otherwise, enter the number of minutes you want to have elapsed before
your internet access disconnects.
•
Connect Automatically
- The connection can be re-established automatically
when it is down.
•
Time-based Connecting
- The connection will only be established in the period
from the start time to the end time (both are in HH:MM format).
•
Connect Manually
- You can click
Connect/Disconnect
to connect/disconnect
immediately. This mode also supports the
Max Idle Time
function as
Connect
on Demand
mode. The internet connection can be disconnected automatically
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the internet again.
Note:
• Only when you have configured the system time on the
System Tools
>
Time Settings
page, will the time-
based connecting function take effect.
• Sometimes the connection cannot be terminated although you have specified the
Max Idle Time
because
some applications are visiting the internet continually in the background.
If you want to do some advanced configurations, please click
Advanced
.
•
MTU Size
- The default MTU size is 1480 bytes. It is not recommended that you change
the default MTU size unless required by your ISP.
•
Service Name/AC Name
- The service name and AC (Access Concentrator) name
should not be configured unless you are sure it is necessary for your ISP. In most
cases, leaving these fields blank will work.
•
ISP Specified IP Address
- If your ISP does not automatically assign IP addresses to
the router, please select
Use IP address specified by ISP
and enter the IP address
provided by your ISP in dotted-decimal notation.
•
Detect Online Interval
- The router will detect Access Concentrator online at every
interval. The default value is 0. You can input the value between 0 and 120. The value
0 means no detect.
