38
Chapter 4
&RQƮJXUHWKH5RXWHULQ6WDQGDUG:LUHOHVV5RXWHU
Virtual Servers can be used to set up public services in your local network, such as
HTTP, FTP, DNS, POP3/SMTP and Telnet. Different service uses different service port.
Port 80 is used in HTTP service, port 21 in FTP service, port 25 in SMTP service and port
110 in POP3 service. Please verify the service port number before the configuration.
Share my personal website I’ve built in local network with my
friends through the internet.
For example
, the personal website has been built in my home PC
(192.168.0.100). I hope that my friends on the internet can visit
my website in some way. My PC is connected to the router with
the WAN IP address 218.18.232.154.
Router
WAN: 218.18.232.154
LAN
Home
Personal Website
1.
Set your PC to a static IP address, for example 192.168.0.100.
2.
Visit
http://tplinkwifi.net
, and log in with the username and
password you set for the router.
3.
Go to
Forwarding
>
Virtual Servers
.
4.
Click
Add New
. Select
HTTP
from the
Common Service
Port
list. The service port, internal port and protocol
will be automatically filled in. Enter the PC’s IP address
192.168.0.100 in the
IP Address
field.
5.
Leave the status as
Enabled
and click
Save
.
Note:
• It is recommended to keep the default settings of
Internal Port
and
Protocol
if you are not clear about which port and protocol to use.
• If the service you want to use is not in the
Common Service Port
list, you
can enter the corresponding parameters manually. You should verify the
port number that the service needs.
I want to:
