TL-WR842N
300Mbps Multi-Function Wireless N Router User Guide
- 64 -
password for each user account is not displayed.
Confirm Password -
Re-enter the password here.
Storage Authority –
Choose
Read and Write
or
Read Only
from the drop-down list to
assign access authority of Storage Sharing to the user.
FTP Access –
Choose
Yes
or
No
from the drop-down list to decide whether the user can
access FTP Server or not.
Save
- You can click the
SAVE
button to save your settings.
Back
- You can click the
Back
button to discard the settings and just go to the media server
configuration page.
Note:
1. The two default user accounts cannot be deleted.
2. Please restart the service for the new settings to take effect.
3. If you cannot use the new user name and password to access the shares, press
Windows
logo
+
R
to open the Run dialog box and type
net use
\\192.168.0.1 /delete /yes
and press
Enter. (192.168.0.1 is your router's LAN IP address. If the LAN IP of the modem connected
with your router is 192.168.0.x, the default LAN IP of the Router will automatically switch from
192.168.0.1 to 192.168.1.1 to avoid IP conflict; in this case, please try
net use \\192.168.1.1
/delete / yes
.)
4.11 Forwarding
Figure 4-54 The Forwarding menu
There are four submenus under the Forwarding menu (shown in Figure 4-54):
Virtual Servers
,
Port Triggering
,
DMZ
and
UPnP
. Click any of them, and you will be able to configure the
corresponding function.
4.11.1 Virtual Servers
Choose menu “
Forwarding
→
Virtual Servers
”, and then you can view and add virtual servers in
the next screen (shown in Figure 4-55). Virtual servers can be used for setting up public services
on your LAN. A virtual server is defined as a service port, and all requests from Internet to this
service port will be redirected to the computer specified by the server IP. Any PC that was used
