TL-WR842N
300Mbps Multi-Function Wireless N Router User Guide
- 16 -
in your network. The default SSID is set to be TP-LINK_XXXX. This value is
case-sensitive. For example,
TEST
is NOT the same as
test
.
Region
-
Select your region from the drop-down list. This field specifies the region
where the wireless function of the router can be used. It may be illegal to use the
wireless function of the router in a region other than one of those specified in this field. If
your country or region is not listed, please contact your local government agency for
assistance.
Note:
Limited by local law regulations, version for North America does not have region
selection option.
Wireless Security
Disable Security -
The wireless security function can be enabled or disabled. If
disabled, the wireless stations will be able to connect the router without encryption.
WPA-PSK/WPA2-PSK –
It’s selected by default, with the default PSK password
the same as the default PIN code.
No Change -
If you chose this option, wireless security configuration will not
change!
The above settings are only for basic wireless parameters. For advanced settings, please
check “
More Advanced Wireless Settings
”, and then you can set the following parameters.
Band -
This field displayed the operating frequency being configured.
Mode -
This field determines the wireless mode which the router works on.
11bg mixed -
Select if you are using both 802.11b and 802.11g wireless clients.
11bgn mixed -
Select if you are using a mix of 802.11b, 11g, and 11n wireless
clients.
Channel Width -
Select any channel width from the drop-down list. The default setting
is “Auto”, which can adjust the channel width for your clients automatically.
Channel -
This field determines which operating frequency will be used. It is not
necessary to change the wireless channel unless you notice interference problems with
