TL-R860
Cable/DSL Router User Guide
1.3 Panel Layout
1.3.1 The Front Panel
The front panel of the TL-R860 consists of several LED indicators, which is designed to
indicate connections. Viewed from left to right. Table 1-1 describes the LEDs on the front
panel of the router.
Figure 1-1 Front Panel sketch
Name
Status
Indication
Off
No Power
On Power
on
Power
Flashing System is beginning to be restarted
Off
There is no device linked to the corresponding port
On
There are devices linked to the corresponding ports but no data
transmitted or received.
WAN/1-8
(LAN)
Flashing Sending or receiving data over corresponding port
Table 1-1 The LEDs description
1.3.2 The Rear Panel
The rear panel contains the following features. (Viewed from left to right:)
¾
RESET: Factory Default Reset button
There are two ways to reset the router's factory defaults:
1. Use
the
Factory Defaults
function on
System Tools
->
Factory Defaults
page
in the router's Web-based Utility.
2. Use the Factory Default Reset button: Press the Reset button for five seconds
and then wait for the router to reboot.
)
Note:
Ensure the router is powered on before it restarts completely.
¾
WAN: WAN RJ45 port for connecting the router to a cable, DSL modem or Ethernet
¾
1-8: Eight LAN 10/100Mbps RJ45 ports for connecting the router to the local PCs
¾
POWER: power socket: only use the power adapter supplied with the TL-R860
Cable/DSL Router, use of a different adapter may result in product damage.
- 3 -
