TL-R860
Cable/DSL Router User Guide
¾
Remote Management IP Address
-
This is the current address you will use when
accessing your router from the Internet. The default IP address is 0.0.0.0. It means
this function is disabled. To enable this function, change the default IP Address to
another IP Address as desired.
To access the router, you will type your router's WAN IP address into your browser's
address (in IE) or Location (in Navigator) box, followed by a colon and the custom port
number. For example, if your Router's WAN address is 202.96.12.8 and you use port
number 8080, enter in your browser: http://202.96.12.8:8080. You will be asked for the
router's password. After successfully entering the password, you will be able to access
the router's web-based utility.
)
Note:
Be sure to change the router's default password to a very secure password
.
4.7.6 Advanced Security
Using Advanced Security page (shown in Figure 4-32), you can protect the router from
being attacked by TCP-SYN Flood, UDP Flood and ICMP-Flood from LAN.
Figure 4-32 Advanced Security settings
¾
Packets Statistic interval (5 ~ 60)
-
The default value is 10. Select a value
between 5 and 60 seconds in the pull-down list. The
Packets Statistic interval
value indicates the time section of the packets statistic. The result of the statistic
used for analysis by
SYN Flood
,
UDP Flood
and
ICMP-Flood
.
¾
DoS protection
-
Enable
or
Disable
the DoS protection function. Only when it is
enabled, will the flood filters be effective.
- 35 -
