TL-R860
Cable/DSL Router User Guide
Chapter 4. Configuring the Router
This chapter describes each web page's key functions.
4.1 login
After your successful login, you can configure and manage the router. There are eleven
main menus on the left of the web-based utility. Submenus will be available after you click
one of the main menus. The eleven main menus are:
Status, Quick Setup, Network,
DHCP, Forwarding, Security, Static Routing, IP QoS, IP & MAC Binding, Dynamic
DNS and System Tools.
On the right of the web-based utility, there are the detailed
explanations and instructions for the corresponding page. To apply any settings you have
altered on the page, please click the
Save
button.
There are the detailed explanations for each web page's key functions below.
4.2 Status
The Status page displays the router's current status and configuration. All information is
read-only.
1. LAN
This field displays the current settings or information for the LAN, including the
MAC
address, IP address and Subnet Mask
.
2. WAN
These parameters apply to the WAN port of the router, including
MAC address, IP
address, Subnet Mask, Default Gateway, DNS Server
. If PPPoE is chosen as the
WAN connection type, the
Disconnect
button will be shown here while you are
accessing the Internet. You can also cut the connection by clicking the button. If you
have not connected to the Internet, a
Connect
button will be shown, you can then
establish the connection by clicking the button.
3. Traffic
Statistics
This field displays the router's traffic statistics.
4. System Up Time
This field displays the time since router is powered on or is rebooted
.
- 11 -
