TL-R860
Cable/DSL Router User Guide
There are three submenus under the Network menu (shown in Figure
4-2
):
LAN
,
WAN
and
MAC Clone.
Click any of them, and you will be able to configure the corresponding
function. The detailed explanations for each submenu are provided below.
You can configure the IP parameters of the LAN on this page.
4.4.1 LAN
Figure 4-3 LAN
ysical address of the router, as seen from the LAN. The
ermines the size of the network. Normally
255.0 as the subnet mask.
he IP address of the LAN, you must use the new IP address to login
dress pool in
Host may change accordingly at the same time, you’d better re-configure it as
well.
ction type
get IP parameters from
your ISP. You can see the page as follows (Figure 4-4):
¾
MAC Address
- The ph
value can't be changed.
¾
IP Address -
Enter the IP address of your router (factory default: 192.168.1.1).
¾
Subnet Mask -
An address code that det
use 255.255.
)
Note:
a. If you change t
to the router.
b. If the new LAN IP Address you set is not in the same subnet, the IP ad
the DHCP sever will not take effect, until they are configured properly.
c. If the new LAN IP Address you set is not in the same subnet, the Virtual Server and
DMZ
4.4.2 WAN
You can configure the WAN port parameters on this page.
First, please choose the WAN Connection Type (Dynamic IP/Static IP/PPPoE/802.1x +
Dynamic IP/802.1x + Static IP) to the Internet. The default type is
PPPoE
. If you aren’t
given any login parameters (fixed IP address, logging ID, etc), please select
Dynamic
IP
. If you are given a fixed IP (static IP), please select
Static IP
. If you are given a user
name and a password, please select PPPoE
.
If you are not sure which conne
you use currently, please contact your ISP to obtain the correct information.
1. If
you
choose
Dynamic IP,
the router will automatically
- 13 -
