TP-Link TD-W8968, Руководство пользователя

Страница: 30 / 119

TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
)
Note:
To completely configure the WAN Interface, you need to first select the Layer2 Interface ( 4.5.1
Layer2 Interface ) according to the connection ISP provides for you, and then to select the type of
the connection ( 4.5.2 WAN Service ) for the further configuration.
4.5.1 Layer2 Interface
4.5.1.1 ATM Interface
Choose “ Advanced Setup ”
Æ
“ Layer2 Interface “
Æ
“ ATM Interface ”, you can Configure ATM
interfaces on the screen below.
Figure 4-3
¾
Remove : Select the check box in the table on the screen above and then click the Remove
button, the corresponding interface will be deleted in the table.
)
Note:
If the interface is used by the configuration of the 4.5.2 WAN Service , you need to remove the
corresponding WAN Service entry first before you can remove it here.
¾
Add : Click the button, and you can add a new interface in the next screen.
Figure 4-4
¾
VPI / VCI : the VPI and VCI values provided by your ISP. Do not change them unless it was
required by your ISP.
18