TP-Link TD-W8968, Руководство пользователя

Страница: 55 / 119

TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
4.5.7.2 MAC Filtering
Choose “ Advanced Setup ”
Æ
“ Security ”
Æ
“ MAC Filtering ”, you can configure MAC Filtering rules
on the screen as shown in Figure 4-38. The section allows you to control access to the Internet by
users on your local network based on their MAC Address.
)
Note:
MAC Filtering is only effective on ATM PVC(s) configured in Bridging mode.
Figure 4-38
¾
Change Policy: There are two policies for the MAC filters : FORWARDED and BLOCKED .
Select the Change checkbox and click the Change Policy button to change from one policy
to another. When you set FORWARDED , it means that all MAC layer frames will be
forwarded except those matching with any of the specified rules in the table (shown in Figure
4-38). While BLOCKED means that all MAC layer frames will be blocked except those
matching with any of the specified rules in the preceding table.
¾
Add: Click the Add button, and then you can add a new MAC Filter in the next screen (shown
in Figure 4-38).
¾
Remove: Select the check box in the table (shown in Figure 4-38) and then click the Remove
button, and then the corresponding entry will be deleted in the table.
To add a MAC Filtering rule:
1. Click the Add button in Figure 4-38, and you will see the next screen similar to in Figure 4-39.
Figure 4-39
2. Select Protocol Type in the drop-down list for the rule.
43