15
Chapter 4
Configure Internet Connections
•
Stateless DHCPv6:
Stateless DHCPv6 is a combination of “Stateless Address
Autoconfiguration” and “Dynamic Host Configuration Protocol for IPv6” and is
specified by RFC3736. Select the checkbox to enable this function.
4.
Click
Save
to make the settings effective. Now IPv6 service is available for your
network.
4 2 Test Internet Connectivity
After manually setting up an internet connection, you need to test the internet
connectivity. The modem router provides two diagnostic tools to help you locate the
malfunction.
1.
Visit
http://tplinkmodem.net
, and log in with the password you set for the router.
2.
Go to
Advanced
>
System Tools
>
Diagnostics
.
3.
Select
Ping
or
Traceroute
as the diagnostic tool and enter the parameter according
to your needs.
•
Ping
is used to test the connectivity between the router and the tested host,
and measure the round-trip time.
IP Address/Domain Name:
Enter the IP Address/Domain Name that you want
to ping.
Enter the optional parameters in the Advanced section:
Ping Count:
Enter the number of times you want to ping the target device.
Ping Packet Size:
Enter the size of the ping packet you want to use.
